TD-Y Overdrive

 
TD Y 

NEW VERSION AVAILABLE NOW! 

           

A versatile low to medium gain overdrive, boost, and equaliser capable of rich, complex tone-sculpting characteristics.

Now with 3 way diode clipping switch, mids control &

a new push button switch which reverts the pedal back to the original 4 knob circuit.

         

   

 

 

 

 

 

 

FREE SHIPPING WITH ALL PEDALS TO MOST COUNTRIES! *

Debit or Credit Card

Payment Available 

ScreenHunter 03 Apr 02 1827

 


MN3007 Mini 

What is it?

The PastFx TD-Y is a faithful reproduction of the now discontinued Buffalo FX TD-X Equaliser and Gain Booster pedal, which itself was inspired by a popular valve-powered overdrive favoured by several notable rock artists during the 1980s and ‘90s. The TD-Y has been produced in a smaller, pedalboard-friendly enclosure, and made with the same careful attention to detail and high-quality components as the pedal upon which it is based. It is a highly tweakable and useful tone sculpting tool that can be set to act as a potent equaliser, a clean or dirty boost, or as a satisfyingly rich and complex overdrive. There is plenty of headroom on tap to allow players to generate great tones from the pedal alone or by using it to push their amplifiers over the top. The PastFx TD-Y can go from beautiful, blooming low gain creaminess all the way up to medium gain distortion and early British amp characteristics, especially working in tandem with an amplifier’s character and playing environment.

Specs:

  • Controls for Gain, Level, Bass, Mids and Treble to shape the sonic character of the effect.
  • True bypass operation.
  •  New external 3 way toggle switch to select symmetrical  V1 (factory default) or new V2 clipping option

    and a middle position, which removes diode clipping, resulting in less compression and a slight volume boost.

  • New Push Button switch. When depressed, the mids control is removed from the pedal and the circuit returns to the original V1 4 knob design.
  • Dimmable LED, internally adjustable.  
  • Requires a 9vDC centre negative tip power supply, drawing only 5.5 mA current.
  • Dimensions: 112 x 60 x 31mm / 4.4" x 2.36" x 1.22" (enclosure only)
  • Input impedance: 1 MΩ
  • Neutrik Instrument jacks, with audiophile grade parts sourced from MMK, Wima, Epcos, Vishay, Panasonic, Nichicon, etc., just like its predecessor.

AS WE ARE ALWAYS LOOKING FOR WAYS TO IMPROVE OUR PRODUCTS, PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.


 IMG 9736

Review

Hi, Verlie, I got the TD-Y v2 today! I love this pedal! It really can sound like a BK TD, but holy crap it's WAY more versatile. I was expecting the TD-Y to kinda just stay in the range of the Boss BD-2 and the BK TD, and it does both of those nicely, and without the fizz/sizzle. But it goes well beyond the scope of those pedals, and does so in an extremely nice, organic sounding way, both clean or driven. Initially, I assumed the TD-Y was ultimately a "clone" of the Butler pedal, so I adjusted the knobs as I would on a BK TD. Bad idea. The TD-Y's controls work quite differently, and the "MIDS" knob is genius. That's the money knob for sure. I just got the pedal, so I can't say which switch position, v1 or v2, I like better. Also, it was nice to be able to remove the 1970's school lunchbox sized BK TD from my board and replace it with a normal sized pedal....and no more dedicated power cord. Bottom line is the TD-Y v2 is a very versatile pedal. You've done a great job with it!

-Michael

 

PdfMN3007 Mini

Reticon Flanger

 

retic

 

 Due to the scarcity of NOS Reticon bucket brigade devices, there will be a limited number of Flangers available.

Unless more NOS Reticon chips become available, we envisage only one production run occuring at this time.

Flanger Reticon V1 logo

 

FREE SHIPPING WITH ALL PEDALS TO MOST COUNTRIES! *

Debit or Credit Card

Payment Available 

ScreenHunter 03 Apr 02 1827

 Below is a video of Unit #13 of the Original Buffalo Fx Reticon Flanger Pedal.

 

 

 

What Is It?

The PastFx Reticon Flanger is a faithful recreation and expansion of perhaps the most notorious and controversial Buffalo FX pedal of the same name. The original Reticon Flanger was an interpretation of Several Versions of Electric Mistress pedal (including 1990's Deluxe version) by Electro-Harmonix  and popularised through its legendary use in countless recordings since it first arrived on the scene in the mid-1970s, perhaps most notably in the spellbinding guitarwork of David Gilmour, an early adopter of the effect who made it a mainstay of his sound upon its introduction into his rig. Like the classic Electric Mistress, the Reticon Flanger is remarkable for its very chewy, liquidy, and chorus-like textures at slower speeds, with trippy warbles and swooshing feedback available by experimenting with the knobs. Controls for shaping its tonal character, response, mix, and harmonic content, with 18 volts of headroom, make it one of the lushest EM-style flangers available today. The pedal stacks beautifully with dirt but shines just as bright when run clean. And speaking of brightness, we’ve added an internal micro switch that allows players to expand the treble range of the pedal, for those who find the stock setting a little dark for their amps or personal tastes, offering additional versatility on a circuit that is already very hard to find.

The story behind our offering of the Reticon Flanger requires a little history. In early 2020, the proprietor of Buffalo FX took pre-orders for a limited run of 100 Reticon Flanger units, shipped approximately 15 pedals around March/April 2020, and then mysteriously withdrew from all public contact, with the company’s website and social media going dark shortly thereafter. Unfortunately, a lot of prospective customers lost out on ever receiving a pedal, and many more never had an opportunity to even acquire one in the first place. The whole saga was captured in real-time on a Gear Page thread dedicated to the ill-fated product’s release and collapse. Frankly, we don’t know (and can’t speculate) on what exactly transpired to cause this series of events to unfold as they did, nor the various contingencies that may have occurred. The full story may always be elusive. However, we do know that we unexpectedly managed to become a small part of the original pedal’s saga. You see, as we note in our description of the Spectrum Collection, people began contacting us in Spring 2020 to ask if we were a new offshoot of the Buffalo FX company, and if we could fulfill outstanding orders. Down in Australia, we had barely even heard of Buffalo FX at that point! We were amused at first, but after receiving quite a volume of inquiries, we soon realised that we could actually fulfill our commitment at PastFx to bringing back beloved and often hard-to-acquire “pedals from the past” by crafting precise recreations of the best Buffalo FX pedals in pedalboard-friendly enclosures, packed with all the trimmings. Then, when we learned about the backstory behind the BFX Reticon Flanger pedal’s doomed release, we knew that our own version would absolutely have to be a centrepiece of what we would come to call our Spectrum Collection. And so, we have endeavoured to bring a happy end to this story.

We managed to locate and purchase one of the rare 15 BFX Reticon Flangers known to be in circulation, then meticulously studied every component, tested every value and part one-by-one, mapped the circuit and design, and faithfully recreated the Reticon Flanger from top to bottom, using the same exact quality components as the original, but housed in a smaller pedalboard-friendly enclosure. At the heart of both the original and our own Reticon Flanger is a NOS Reticon 512 stage Bucket Brigade Device, which are extremely rare, long discontinued, and prohibitively expensive. We are pleased to share that we managed to locate the actual, original Reticon chips that were recovered from Buffalo FX’s closed operations. While we have a very limited stock of Reticon chips available and will only be able to offer this pedal until our supply is depleted, we are delighted to report of its high-quality sonic impact on the overall sound and authenticity of the PastFx Reticon Flanger effect, and we are extremely pleased to be able to make this pedal available once more. It will only ever be sold when in stock.

 

Specs:

  • Vintage Unobtainium NOS Reticon 512 stage Bucket Brigade Device
  • Rate – Controls the speed of flanger modulation.
  • Range – Controls the sweep of the flange effect.
  • Color – Sets the intensity (feedback) of the flanger effect.
  • Treble – Cuts or boost high frequencies.
  • Blend – Determines the amount of flange effect mixed with the dry signal.
  • Level – Output level of effect.
  • Matrix Mode – disengages the rate control. The color and range control can be adjusted to give a resonant chime like effect.
  • True bypass operation
  • Internal micro switch to expand treble range of pedal and control overall brightness
  • Requires an 18V DC negative centre power supply, drawing under 50mA current; no battery option available
  • Dimensions: 112 x 60 x 31mm / 4.4" x 2.36" x 1.22" (enclosure only)
  • Neutrik Instrument and Lumberg DC jacks, with audiophile grade parts sourced from MMK, Wima, Epcos, Vishay, Panasonic, Nichicon, etc., just like its predecessor

AS WE ARE ALWAYS LOOKING FOR WAYS TO IMPROVE OUR PRODUCTS, PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.


 

PdfElastic Mattress logo
Reviews:

Hello:
I received the Reticon Flanger a couple days ago but just got to play with it now.  Sounds excellent!  Solves all the problems I disliked with my original Electric Mistresses. Volume drop, no blend or EQ options and a high noise floor. Has the signature EX sound I love, not to mention, in a tiny pedal size.  I don’t even really have room on my board for the original anymore. Glad you guys went after this rare pedal and nailed it!

Thanks.
Pete

 

 

ScreenHunter 01 Jan 10 2121

ScreenHunter 02 Jan 10 2122 2021GPXPastFXReticonFlanger

 
 

Pedals mki

Elastic Mattress logo

Flanger

CED picture 1ScreenHunter 09 May. 03 12.27

MINI pictureScreenHunter 08 May. 03 12.25

MN3007 pictureMN3007

hj

MN3007ScreenHunter 08 May. 03 12.25

preampcrunchScreenHunter 10 May. 03 12.29

Preamp Crunch PlusPFX 01 UV Preamp Crunch PLUS66

image7b

foxx foot Phaser text
 

image2a                                                                                        
Foxx V1fdsfd

Deluxe

 

JFET FUZZ PHASER

 IMG 4013 smaller

Untitled 1hh

 

grey spectrum logo

sPECTRUM cOLLECTION

 

Nick James Foot Phaser

 

nj_foxx_small

 

         

   

A stompbox sized recreation of the treadle-based Foxx Foot Phaser V1, made in collaboration with Nick James of Peril Pedals.

 

 

 

 

 

 

 

 

 

FREE SHIPPING WITH ALL PEDALS TO MOST COUNTRIES! *

Debit or Credit Card

Payment Available 

ScreenHunter 03 Apr 02 1827

foxx foot Phaser

 

 

What is it?

The Pastfx Nick James Foot Phaser is a collaboration with Nick James of Peril Pedals and is based upon the foxx Foot Phaser V1.

The foxx Foot Phaser is made famous by Brian May of Queen. Made in the 70’s, its treadle design allowed the Phase speed to be controlled by knob or treadle.

Foxx released several versions of the foot phaser with different number of phase stages and circuit design. However it is Version 1’s design that is most synonymous with Brian May.

The Nick James foot phaser requires considerable testing to find a set of 10 matching transistors. This involves testing thousands of transistors by hand, to get the perfect phase.

 

Features

  • 10 hand matched Jfet transistors
  • Speed knob
  • Depth knob
  • 2 speed range switch
  • 9vdc operation (boss style)
  • Quality components - Neutrik Jacks and Lumberg Dc sockets
  • Led indicator effect on
  • Compact modern sized effect
  • Powder coated enclosure with UV Printed graphic

AS WE ARE ALWAYS LOOKING FOR WAYS TO IMPROVE OUR PRODUCTS, PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.


 

PdfUntitled 1dsasdasd

Reverb